FreeScan Combo / Combo + - Connection

Applicable Products:
FreeScan Combo and Combo+


Overview:

This guide will walk you through the setup process for connecting your FreeScan Combo or Combo+ system. 


Step-by-Step Setup Instructions :


Step 1: Connect the aviation cable (4) to the power port (1) and the USB port (2

  • The necessary cables and items are in the box with the scanner


Step 2: Connect the power cord (6) to the power adapter (7



Step 3: Connect the power adapter (5) into the aviation cable (4). 


Step 4: Connect USB port (3) on the aviation cable to the PC USB 3.0 port

  • Usually the USB 3.0 is marked with the color Blue 

Note:

    It usually happens if the connection in not with USB 3.0, that the scanner will not be seen or it will register very hard the points while scanning.



Step 5: Insert the Dongle (8) into the PC USB port.


Note:

    The Dongle USB is the key that lets the software FreeScan to be access, without it the software and the scanner will not work.


Attention:


    Ensure that cables are not loose during the above operations. You are suggested to use fastening tools to prevent the device from being offline.

 

    Make sure you are using the correct power adapter (12V/5A). 



Step 6: Plug in the socket the power connection to power up the scanner.


 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.