When residues remain in the resin tank, customers need to clean the resin tank. AccuFab D1s has a built-in cleaning function. Here is the tutorial to show detailed steps.
|Disposal Gloves||PET card|
Step 1: Access to clean residue function.
There are two ways to access the function.
1. Open a sliced file (.slp3)
In the checklist interface, click "Go to clean the resin tank."
2. In the main interface, click "Settings -> Project Settings -> Start Clean."
Step 2: In the pop-up window, click "Confirm," and the printer will cure the bottom layer for 10 seconds.
Step 3: After the curing is finished, take out the PET card from the accessory box and use it to peel off the bottom layer.
Step 4: Remove the cured layer and ready to print.